Product Description:
FET-99T Intelligent Digital Eddy Current Flaw Detector is suitable
for on-line and off-line flaw detection of metal pipes, rods,
wires, tubes, steel bars, electromagnetic wires, copper wires,
aluminium wires, and it can be used for automatic flaw detection of
other mechanical parts. With relatively independent test channel,
can be driven by the absolute and differential coil composition of
the combined probe, detection channel at the same time for data
acquisition, for the detection of metal pipe, bar, wire in the
production of longitudinal cracks and transverse defects (such as
barge mouth), the dark fengcai, dark cracks, open cracks and other
axial defects have a high degree of sensitivity.
Application:
Crack injuries and channel injuries caused by faults in the
production process can be reliably detected. The signals acquired
by the detection channel can be displayed on the screen in real
time as impedance plane and time base scanning diagrams. Can adapt
to a variety of different metal, wire and other testing
requirements, and because of the use of fully digital design, so
the instrument can be established in a number of standard testing
procedures or expert system, convenient for users to call when
changing product specifications, equipped with input and output
control interface, easy to detect the site and a variety of
equipment connected to the synchronous work, constituting a high
degree of automation as a whole.
Technical Parameters:
| Name | Portable Ultrasonic Flaw Detector HY-350 |
|---|
| Gain | 0-99dB,steps of 0.1dB |
| Phase | 0-359 degree,steps of 1 degree |
| Gain ratio (Y/X) | 0.1-10 |
| Applicable to a variety of probes | such as external pass-through, rotary, etc. |
| Applicable to the material | metal pipe, bar, metal parts, production plant online quality
inspection |
| Multiple display modes | impedance, time base |
| Display modes | solid line, Fading |
| fading display coefficient | 1 ~ 100 |
| standby power consumption | < 15W |
Support and Services:
1. From the date of completion of installation and commissioning of
the equipment, as the beginning of the quality assurance period of
the equipment. The supplier will warranty the equipment for one
year and implement lifelong maintenance service for the equipment.
In the equipment warranty period of the relevant costs borne by the
supplier, in the equipment warranty period outside of the relevant
costs of the supply side only charge material costs.
2. The equipment into normal operation after the supply side will
still be ready for the demand side to provide all the technical
advice
3. In the use of equipment in the process of the demand side can
not be resolved by the demand side of the technical problems, the
supply side in the receipt of the demand side's request, should be
answered and put forward solutions
FAQ:
Q1: What is the brand name of this product?
A1: The brand name of this product is Desisen.
Q2: What is the model number of this product?
A2: The model number of this product is FET-99T.
Q3: Where is this product made?
A3: This product is made in China.
Q4: Does this product have any certification?
A4: Yes, this product has ISO9001 certification.
Q5: What's the minimum order quantity?
A5: The minimum order quantity is 1.
