Double Channel Eddy Current Sorter Steel Hardness Automatic Sorting
Machine
Discriptions
EHS-4 eddy current hardness non-destructive sortors (also known as
eddy current testing systems for hardness measurement) are devices
that utilize electromagnetic induction to evaluate the hardness of
conductive materials without causing damage to the material. These
systems work based on the principle of eddy currents, which are
circular electric currents induced within conductors when they are
exposed to a changing magnetic field. The characteristics of the
eddy currents (such as their magnitude and distribution) depend on
the material's properties, including its hardness.
EHS-4 eddy current hardness non-destructive sortors is suitable for the hardness sorting of cast iron, ductile iron,
wear-resistant cast iron and malleable cast iron (commonly known as
malleable iron), all kinds of cast iron normalizing, annealing,
quenching or tempering hardness detection, can be used for
automatic sorting system.
EHS-4 eddy current hardness non-destructive sortorscan also be used for normalizing and annealing hardness detection
and sorting of any steel, such as various wire rolling parts,
gears, etc.EHS-4 eddy current hardness non-destructive sortors can also be water heating pipe hardness sorting.
Specifications
EHS-4 eddy current hardness non-destrutive sortors| Channel | 2 | | Detection object | Steel hardness automatic sorting | | Detection speed | Single channel: <5s/ piece | | Detection accuracy | Brinell hardness: <±13HB | | Compressed air pressure range | 0.4Mpa-0.8Mpa | | Operating voltage | AC220±10 v | | Operating Temperature | Tippically from -15°C to + 55°C | | Storage temperature | Tippically from -20℃ to +60℃ | | Relative humidity | Not more than 85% | | Dimension | Mechanical drive part:2000×1000×1600mm | | weight | <500Kg |
|
|
Other descriptions
The workpiece tested with EHS-4 eddy current hardness non-destrutive sortors must meet the same material, the same size, the same surface
state, the same heat treatment process state, and the surface is
not serious defect.
EHS-4 eddy current hardness non-destrutive sortors can store the upper limit and lower limit of the magnetic flux of
9 different specifications and sizes of the workpiece, and the
magnetic flux of No. 1, No. 2,No. 3,No. 4... No. 9 represents the
measured workpiece of different specifications and sizes, which is
convenient for users to call directly.
EHS-4 eddy current hardness non-destrutive sortors are Used for 100% non-destructive automatic sorting of qualified and
unqualified hardness of the workpiece after heat treatment. The
workpiece with qualified hardness and the workpiece with
unqualified hardness will be automatically separated by the sorting
door.
The main control instrument of EHS-4 eddy current hardness non-destrutive sortors has a column chart to dynamically display the hardness state of
the workpiece. Under normal process conditions, the amplitude of
the bar chart reflects the hardness of the workpiece to be
measured, which is intuitive.
EHS-4 eddy current hardness non-destrutive sortors ’oparating picture
